GREENRIY TECHNOLOGY CO.,LTD

Products >> LED Aviation obstruction lights >> 

  • Medium intensity double color LED Obstruction Light/Eurolight
  • Medium intensity double color LED Obstruction Light/Eurolight
Medium intensity double color LED Obstruction Light/Eurolight Medium intensity double color LED Obstruction Light/Eurolight

Medium intensity double color LED Obstruction Light/Eurolight

double color medium-intensity aviation obstruction Light ,its base is caste by high intensity aviation aluminum with full sealed structure ;;lamp shade adopts Borosilicate glass,which has strong ability of corrosion,anti-UV,anti-shock;Smart circuit design, it can emit white color at daytime and change to red color at night. Controlling circuit has strong ability of lighting protection and with anti-surge protection device ,it can adapt to extremely bad working environment.There are many kinds of functions for customer adjust

Dimension drawing
dimension drawing for led medium intensity aviation lights

PARAMETER
Parameter for medium intensity led aviation obstruction lights

Function&Features 
1.Adopts Fresnel lens PC lamp shade,emmitting angle follow the standard of FAA
2.With automatically light control function that can change to working mode
at rainy day and night.
3.LED light source, its service life can up to 100000hours.
4.Low voltage design, high safety degree for using.
5.Possess ability of anti-shock, light fastness, anti rain and snow. 
6.With anti-surge protection function.
7.Possess lightning protection function.
8.It can be added warning function at dry contact.
9.It contains switch for changing flashing light and steady light.
10.No radio frequency (rf), no electromagnetic interference.

Usage notice
1.Check whether the supply voltage does comply with the rated voltage of device.
2.Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure. 
3.After finished the installation, the personnel must check whether the device is in a good waterproof 4.processing and whether the screw spikes are tightened. 
5.Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.
 

Application
Block
Airport 
High Mast lamp
Chimney 
Towers(Telecom, GSM, Electric)
Bridge 
High-rise Buildings
application for led aviation lights
You have to know something before you purchase correct&best led aviation obstruction lights
1.Aviation obstacle lights are generally divided into low light intensity, medium light intensity and high light intensity. The vertical and horizontal distance of aviation obstacle lights is more than 45 meters, and the buildings and facilities can be used together. Classification of aviation obstruction lights
2.Below 45 meters above the ground, low light intensity aviation obstacle lights should be set up in the surrounding open places, which are always on red light.
3.Buildings and facilities above 45m above the ground and below 105m: in use, the light intensity of type B aviation obstacle light is red flash lamp, the flash rate should be between 20-60 times per minute, and the effective light intensity should be 2000cd ± 25%.
4.Air obstacle light of medium intensity type A should be used above 105m and 150m below the ground; white flashing, effective light intensity (2000-20000 CD) ± 25%.
5.For buildings and facilities above 150 meters above the ground, high light intensity obstacle sign lights must be used and must be white flashing lights. The flash rate should be between 20 and 70 times per minute. The effective light intensity depends on the background brightness, and works 24 hours a day.
6.For obstacles, the highest point and the most edge (i.e. apparent height and apparent width) of obstacles shall be marked with aviation obstacle lights. The spacing between the middle floors must not be greater than 45 meters. In particular, it is necessary to add aviation obstacle lights to super high buildings above 100 meters in the city.
7.The vertical and horizontal distance of the aviation obstacle light should not be greater than 45 meters (that is, if the top of the object is higher than 45 meters above the ground, the obstruction sign lamp must be added in the middle of the object)
8.For chimneys or other buildings of similar nature, the top obstacle marker lamp shall be located between 1.5-3 meters from the top, considering the pollution of chimney to lamps
9.The lamp can be set 4-6 meters below the chimney mouth.
10.The ultra-high objects higher than 150 meters should be used with medium and high light intensity aviation obstacle lights.
11.For high-voltage transmission cables and towers less than 150 meters high, medium intensity aviation obstruction lights with white light can be set on the top.
12.No matter what kind of aviation obstacle lights, the number and arrangement of aviation obstacle lights at different heights should be able to see the "group outline" of the object or object from all aspects, and consider the simultaneous and sequential flashing of obstacle sign lights to achieve obvious warning effect.

Contact Us

Tel: 86-755-29512566

Fax: 86-755-29512566

E-mail: sales01@greenriy.com

Add: 5F,building D1, Xinshidaigongrong industrial park,Shihuan Road,Shiyan Town,Shenzhen City

sales01@greenriy.com
Link